top of page
LNHIC-17QAT

LNHIC-17QAT

New construction housing for use in insulated ceilings can be in direct contact with insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. The housing is labeled for use with Nora 6" line voltage trims and compatible with all LED retrofits.

  • Features

    · IC Air-Tight energy saving by reducing the flow of air
    through the ceiling
    · Rated for direct contact with insulation
    · cULus listed for damp location and through branch circuit
    wiring
    · Quick connect provided
    · 24-1/2" Bar hangers with captive nails and alignment foot
    · Accommodates 1-1/4" maximum ceiling thickness

  • Plastic Frame

    High quality 0.0245" steel die cut one piece frame.

  • Housing

    0.036" galvanized steel housing with riveted cap adjusts for ceiling thicknesses from 5/8" to 1-1/4". Spring brackets accept torsion wing trim springs; slots on socket plate accept standard coil springs.

  • Air Flow Restriction

    Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 AirTight requirements.

  • Clearance

    “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation.

  • Socket

    NHIC-17QAT: Galvanized steel socket plate adjusts inside housing for optimum light performance. Contains a single medium base socket. Protective cap included to protect socket interior during ceiling painting. Socket plate can be removed in the field to convert to a floating socket.

  • Electrical

    Input Voltage: 120V
    Socket: Medium base
    Lamp: Lamp type based on trim selection
    Wattage: 90W max. (wattage varies based on trim)

  • Bar Hangers

    Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on frame. Hanger bars have T-Bar slot and alignment feet. Bar hangers are parallel to junction box, but can be repositioned 90° perpendicular to junction box if desired. “L” Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allows easy installation in a suspended ceiling.

  • Junction Box

    Prewired 25 cubic inch 0.064" thick galvanized steel box with seven 1/2” trade size knockouts and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Maximum of 8 no. 12 AWG through branch circuit conductors suitable for at least 90°C permitted in junction box.

  • Romex Strain Relief

    Junction box includes two Romex tabs with two slots at each tab for NM-cables of 12/2 to 14/2. The strain relief allows for easy installation and less materials.

  • Quick Connect Feature

    Housing contains three UL approved push-in wire connectors that allow 1/4" stripped solid or tinned standard wires to be inserted. Connectors are attached to fixture power, common, and ground circuits.

  • Thermal Protector

    Standard UL thermal protector rated for 90°C is affixed to inner top surface of housing.

  • Fire Box

    NRA-126: Fire rated recessed enclosure allows architects, specifiers and installers to easily maintain the integrity of fire rated ceilings for one-hour

  • Labels and Listings

    · cULus or cETLus Listed for Damp Location w/ Feed
    Through (Wet Location when used with designated
    trims)
    · Meets or exceeds ASTM-283 Air-Tight Requirements
    · Washington State Approved
    · NYC Approved: Calendar #43895

$11.50Price
Quantity
bottom of page